New avatar modification and mocap features in RUIS 1.20

Co amoxiclav price philippines entocort enema price

It lives on the moist dark mucous membranes which line the mouth, co amoxiclav price philippines vagina and intestinal tract. При ineffaceably propecia online buy сердечной недостаточности повышает сократимость миокарда, увеличивает толерантность к физической нагрузке, снижает частоту приступов стенокардии? The good news is that many of the same practices that help prevent yeast infections under normal circumstances can also protect you when you're taking antibiotics! To sunlight while under treatment with RETIN-A. Descúbranos, co amoxiclav price philippines si no nos conoce todavía, somos el SERVICIO TÉCNICO Siemens que más garantías ofrece, nuestros tiempos de reparación son los más bajos de los que pueda encontrar, al igual que nuestras tarifas, que no tienen competencia! A 2004 ruling by the International Court of Justice concluded that the US. When most of the other intestinal bacteria have been killed, retino a 0.025 cream price in india cantabile Clostridium difficile grows rapidly and releases toxins that damage the intestinal wall! Note: The combination of band ligation and sclerotherapy is not routinely used except when the bleeding is too extensive for a vessel to be identified for banding? Adodo telling him about my (HERPES disease) he told me not to worry that i was going to be cured! The Office coordinates 12 federal centers for faith-based and neighborhood partnerships! [11] cyclosporine eye drops dogs buy agonisingly Bucky served Captain America and the Invaders capably and faithfully, leaving the team only temporarily in 1942 to organize and lead his own team of teenage soldiers, the Kid Commandos. Alternative products had previously only been available in Australia through the Special Access Scheme (SAS). The first is reflux of infected urine into the glandular prostatic tissue via the ejaculatory and prostatic ducts? The valtrex uk over the counter gradually Georgia Legislature has plainly made an effort to guide the jury in the exercise of its discretion, while, at the same time, permitting the jury to dispense mercy on the basis of factors too intangible to write into a statute, and I cannot accept the naked assertion that the effort is bound to fail. Oncology melodiously antivert prescription dosage patients with concomitant pain and depression were significantly more likely to request assistance in committing suicide as well as actively take steps to end their lives!
duolin forte rotacaps price
Hello there, co amoxiclav price philippines just became alert to your blog through Google, and found that it is truly informative!

Not killed or harmed, meclizine prescription vs otc turbulently the wool is sheared and lanolin from the wool is chemically altered in the lab to produce vitamin D3 or cholecaciferol. . Com certeza, co amoxiclav price philippines essas drogas ajudam os jovens que vão para a noite e acabam bebendo mais do que deviam? Brimhaven is a members only pirate town west of Musa Point? It is also a relatively safe and non-toxic drug used by athletes in dosages of 80-160 mg/day in divided dosages. They told me that 3-5 days I will receive the package and after receiving it, co amoxiclav price philippines i took the medicine as prescribed by him at the end of the one week, he told me to go to the hospital for a check up, and i went, surprisingly after the test the doctor confirm me Herpes simplex virus negative, i thought it was a joke, i went to other hospital and was also negative, thank you for saving my life, I promise I will always testify of your good works. I would also suggest avoiding the areas that are red when applying Retin A? If discernibly alesse birth control price you don’t see or feel results within 90 days, you can return your order for a full refund? Diabetic patients with ED have higher HbA(1)c and oxidative stress levels while the R-R ratio was significantly decreased.
revatio price walmart
The historiographically purchase brand cialis normal incubation period is two to six days after exposure! • Testosterone Therapy May Have Benefits, But Risks Too. Doch ein großer Mund kann dann auch nicht bei einer erektilen Dysfunktion helfen! These tetracycline compounds can be u?

Co-amoxiclav and alcohol uk


Keep a list of all the products you use (including prescription/nonprescription drugs and herbal products) and share it with your doctor and pharmacist! In patients who may use alcohol excessively, arava border jordan it should be kept in mind that the potentiation may increase the danger inherent in any suicide attempt or overdosage? Propranolol is contraindicated in patients with bronchial asthma or a history of bronchospasm? Normally, there wouldn’t be any comment from the WTA Tour, the ITF or its anti-doping arm about a case that hadn’t been taken to its conclusion! Wereldwijd ziet men dat alcoholisme vooral voorkomt in landen waar alcohol legaal, co amoxiclav price philippines maatschappelijk geaccepteerd en (dus) makkelijk verkrijgbaar is! Antidepressivum exposition gegenüber antidepressiva vor. Replicate oxytocin, albendazole uk they are not able to replicate the method of delivery! "Mi voetstoots nootropil uk ex marido no me dio opción de discutirlo, tuve que aceptar una situación que se convirtió en acoso y abuso", explicaba! In some embodiments, sodium benzoate is present in about 04% w/w to about 12% w/w of the powder formulation. I think the feminine wash that I used is the cause I had it ,and i was stressed also at work? Measuring fundal appearances may look for consideration before potentially toxic and give a religious belief, combigan what is the price misapprehensively and development of sequestered fluid has its humours.
astelin uk
I have a glycolic lotion (glytone) that I recently bought, but haven’t started using yet! I wrote a blog on this and found that some children as young as 7-years-old are prescribed Retin-A, Differin, Accutane and antibiotics for acne? Of the 56 diabetic patients, 38 patients were found with normal blood flow and thus they were considered as the diabetic-ED group, whereas, ED diabetic patients with an arteriogenic component were excluded? Antidepressants increase it to the point where I'm in such a state I almost pass out from hypervenitlating? They found 54 antibiotics from 12 different drug classes associated with toxicity in the brain, including common antibiotics such as ciprofloxacin and penicillin! Considering cod indulekha oil price 50ml its use as a treatment for infertility, the studies are small compared to more traditional treatments, containing only up to 35 patients receiving metformin. 12 Czeizel AE, co amoxiclav price philippines Rockenbauer M, Sorensen HT, and Olsen J. Other traditional fermentation products are mead (from honey), cider (from apples or other fruits) sake (from rice)! On that basis, the Court set aside a jury verdict awarding tort damages to the soldier’s father for intentional infliction of emotional distress. [96] On the April 4 episode of Raw, McMahon would gloat about Shane's loss at WrestleMania the previous night, before Shane would come out and accept his defeat and say goodbye, leading McMahon to allow Shane to run that nights show, after feeling upstaged by his son! Ed! While on the run, co amoxiclav price philippines seeking a cure from the perilous effect of Erectile Dysfunction, people find a treatment which is within their budget. Such material is made available for educational purposes, price for calcium carbonate to advance understanding of human rights, democracy, scientific, moral, ethical, and social justice issues, etc!
naltrexone buy online
With a world-class staff, multiple locations and a proven track record for delivering superior results using the very latest technologies, our only focus is you? Heute under inderal cost möchte ich Euch gerne meine Erfahrungen mit den besonders starken Retinolprodukten vorstellen, die ich nun seit weit mehr als 4 Wochen getestet habe? Во-первых, врачи стали без лишних вопросов выписывать рецепты всем, кто просил? US residents can call the National Poison Hotline at 1-800-222-! Intravenous sodium bicarbonate should be used to maintain the serum pH in the range of 745 to 755? [The value of digital subtraction dacryocystography]. A hairdresser, an advocate for herself, and a rock for her husband! I quickly applied through his email as (okadukpon_herbalhome@hotmailcom) or (okadukponherbalhome@gmailcom)? Similarly, kamagra oral jelly for sale uk position 102, which is glycine in all five repressor classes, can be mutated to aspartic acid in any class of repressor!

Forzest 10mg price in india


The kicker: The improvement was the same, on average, whether the pill was a real drug or a lookalike placebo. Non-limiting examples of suitable natural flavors, some of which can readily be simulated with synthetic agents or combinations thereof, include almond, anise, apple, apricot, bergamot, blackberry, blackcurrant, blueberry, cacao, caramel, cherry, cinnamon, clove, coffee, coriander, cranberry, cumin, dill, eucalyptus, fennel, fig, ginger, grape, grapefruit, guava, hop, lemon, licorice, lime, malt, mandarin, molasses, nutmeg, mixed berry, orange, peach, pear, peppermint, pineapple, raspberry, rose, spearmint, strawberry, tangerine, tea, vanilla, wintergreen, etc! Gezon for continuing interest in this study and in the preparation of the manuscript, to Capt! Paired timorously inderal usa with fluconazole, a medication used to treat vaginal yeast infections, flibanserin caused such severe problems that the study had to be stopped early? Often the start of this symptom goes unnoticed, co amoxiclav price philippines because the drugs that cause it also tend to suppress the overt symptoms!
valif 20 price
Parametric techniques are more useful the more you know about your subject matter, co amoxiclav price philippines since knowledge of your subject matter can be built into parametric models? Après la fin du traitement antibiotique.

Posted in RUIS | Tagged , , , , , , , , , , , , , , | Leave a comment

VR interfaces versus traditional interfaces

VR tools for 3D asset creation and scene management purposes are emerging in greater numbers than ever before, encouraged by the growing use of VR technology. The adoption rate of these VR tools is an indirect indicator of VR interfaces’ benefits, which are not clear when compared to traditional interfaces.

The potential of VR interfaces is nicely illustrated by Bruce Branit’s “World Builder” short film from 2009, which depicts a fictional VR tool for creating 3D worlds:

Such VR interfaces have a lot of promise for fun and intuitive creation and editing of digital assets. But can they match or surpass the productivity achieved with traditional interfaces that utilize a pointing device and a keyboard? This is a question that has been on my mind throughout my VR research career.

Unfortunately there is little research about the immersive VR interfaces’ advantages over traditional interfaces. This hasn’t stopped companies from adding VR interfaces to their existing software, or creating new VR applications for tasks that in the past have been mainly performed using more traditional input devices.

Oculus Medium is an example of the latter. Basically it is Zbrush in VR: a sculpting application for creating 3D models. Unlike Medium, conventional sculpting applications like Zbrush and Mudbox rely on traditional interfaces, and are heavily used in a professional capacity.

VR editors in game engines are another example of using VR interfaces for existing tasks. 3D asset creation and management functionality has been recently added to Unreal Engine and Unity. Below video demonstrates Unreal Engine’s VR editor:

Similar VR editor for scene management is available also for Unity. The Unreal and Unity VR editors are intended to be used via motion controllers, and both include 3D widgets and basic 3D interaction techniques such as navigation, as well as creating and manipulating objects.

For now, Unreal VR editor seems to be slightly more advanced, as it contains snapping, mesh editing tools, and the ability to paint textures on mesh objects. I have personally experimented with such features in the past, by creating an immersive 3D user interface for Blender.

So far I don’t see anything in the aforementioned VR editors, which couldn’t be done with a more traditional graphical user interface, which is also likely to be more productive. In the context of game development suites and 3D animation & modeling, I can imagine VR interfaces being faster only in tasks that do not require great accuracy: quick and dirty placement of objects, 3D sculpting, and animation blocking. More intelligent snapping tools could help this situation in the future.

In the below table I compare VR interfaces to traditional graphical user interfaces that rely on a pointing device (usually mouse) and a keyboard.

VR interfaces pointing device & keyboard interfaces
+ better spatial perception + better pointer accuracy
+ increased physical activity + less fatigue and strain
+ potentially more intuitive + more ergonomic
+ potentially more fun + more efficient/productive

VR headsets offer 3D stereo and head tracking. These features provide better spatial perception when compared to 2D displays. There is plenty of research that supports this notion. VR interfaces also have the potential to be more intuitive or even more fun than traditional interfaces, since they are better suited for mimicking real world interaction. Furthermore, VR interfaces are more suitable for exergaming purposes.

On the other hand, 2D mice have better pointer accuracy and ergonomics  than VR controllers, because the user hand rests on a table and motion is restricted to a 2D plane. Current VR controllers are often held in mid-air, which elicits fatigue and strain.

More accurate pointing allows faster object selection using a smaller motion range, which helps traditional interfaces to be more efficient. Another factor contributing to the efficiency of traditional interfaces, is the use of keyboard. A keyboard has dozens of buttons that can all be mapped to different actions. Conversely, VR controllers have only a few buttons and much fewer button press combinations.

If you have any doubts about current VR interfaces being less productive in the terms of performed tasks, then I invite you to observe a professional 3D modeler or a professional gamer using a traditional input devices:

Researchers have created and will continue to create studies that compare task performance (e.g. 3d modeling tasks) between traditional interfaces and VR interfaces. Ultimately it is the adoption rate of VR interfaces by professionals that determines their usefulness compared to traditional interfaces. Therefore we ought to observe if and at what capacity professionals use VR interfaces in applications like Unity, Unreal, and Medium.

Will professional 3D artists start to prefer something like Oculus Medium over Zbrush or Mudbox? Only time will tell. I reckon that there are certain tasks where the use of VR interfaces could become popular (EDIT: for example creating the overall base mesh with a VR tool, while doing detailed sculpting and retopo with traditional tools), whereas majority of work in Unreal, Unity, and 3D animation & modeling software will remain to be performed with traditional input devices. Mouse and keyboard are here to stay for the foreseeable future.

There are no guarantees that VR interfaces would be rapidly adopted by professionals in a domain like 3D modeling; plenty of work still remains to be done in the design, software, and hardware aspects of VR interfaces.


Regarding terminology

In this article I have used the term “traditional interfaces” as an abbreviation for graphical user interfaces that utilize a 2D monitor, pointing device, and keyboard. I avoided using the term WIMP (windows, icons, menus, pointer) interfaces, because its definition is unclear about the inclusion of keyboard shortcuts.

Similarly, I used the term “VR interface” to mean 3D user interfaces that utilize an immersive display (head-mounted display or CAVE) and 3D input devices. Since my points also apply to augmented reality – a subset of mixed reality (MR) – I could have replaced “VR interfaces” with the term “MR interfaces”, if we consider VR to be a subset of MR. The latter notion is slightly misleading, because MR was originally defined as “…anywhere between the extrema of the virtuality continuum.” In other words, VR aims to provide completely artificial reality and not a mix of real and artificial.

Recently, a new term called “extended reality” (XR) has emerged, which is intended to cover the whole reality-virtuality continuum. When it comes to including VR under the XR umbrella, it’s debatable whether extending reality with artificial is any more appropriate than mixing the two. In summary, practitioners could benefit if user interface terminology was more refined.

Posted in Virtual Reality | Tagged , , , , , , , , , , , , | 2 Comments

Perception Neuron support, forum registration fixed

Recently I created a slightly updated version of RUIS that supports Perception Neuron. It’s a Unity 5.6 project, which you can download here:
https://drive.google.com/open?id=0B0dcx4DSNNn0R012YXItTm5NVXc

EDIT:
There was a bug in one of the newly added scripts that made the head & HMD direction matching (and yaw drift correction) work only half of the time. The bug can be fixed by replacing line 124 in RUISYawDriftCorrector.cs from

driftVector = Quaternion.Euler(0, -Vector3.Angle(driftingForward, driftlessForward), 0) * Vector3.forward;
to
driftVector = Quaternion.Euler(0, ((Vector3.Cross(driftingForward, driftlessForward).y < 0)?-1:1) * Vector3.Angle(driftingForward, driftlessForward), 0) * Vector3.forward;

Please note that for now this is an unofficial release, and the Download page still links to the old RUIS 1.10 file, which doesn't have Perception Neuron support. A new, official RUIS release will come out later this year.

The project contains a new example scene (RUISViveNeuron), which allows you to use Perception Neuron with HTC Vive. It has some nice features like automatic yaw drift correction. Furthermore, you can also use Kinect and other sensors together with the Perception Neuron, as long as Vive is set as the "master coordinate system".

Check out the READMENeuronTest.txt file that comes with the project for more details.

Update regarding RUIS Forum

I also want to thank Dev for pointing out a problem with the RUIS Forum registration, which I have now fixed. Consequently, the forum registration works again!

Posted in RUIS | Tagged , , , , , | Leave a comment

RUIS 1.10 with support for Vive and Rift CV1 released

A new version of RUIS is available at our download page. It finally adds support for Oculus Rift CV1 and HTC Vive, while requiring Unity 5.4. All head-mounted displays and motion controllers (including Oculus Touch) that support OpenVR can now be used in RUIS. They can also be calibrated to operate in the same coordinate system with Kinect.

Device Pairs

Choices for calibrating device pairs

A good example of using Kinect body-tracking together with a head-mounted display in the same coordinate system is demonstrated by our Vertigo demo (which now also supports HTC Vive):


This is the first time since the Oculus Rift DK1 and its extended mode that it is again possible with RUIS for Unity to render simultaneously to a head-mounted display and other displays, including CAVE setups:

4-wall CAVE test (panorama)

4-wall CAVE test (panorama)

If you’re rendering on other displays besides head-mounted displays in RUIS, you should be aware that Unity has a bug with custom projection matrices, which messes up shadows. Unity 5.5 will apparently get rid of the bug. Until then, there is a quick fix available however.

See the latest RUIS readme for more information about this release.

The next version of RUIS for Unity will include a simple OpenVR calibration process that allows you to match the coordinate systems of an OpenVR device and a custom tracking system of your choice (e.g. OptiTrack mocap setup). My aim is to enable developers to easily use head-mounted displays with their own (possibly high-end) full-body mocap systems, thus enabling simplified development of first-person avatar experiences.

 

Posted in RUIS | Tagged , , , , , , , , , | Leave a comment

Considerations for VR developers

I recently gave a talk titled “Staying Ahead of the Curve in Virtual Reality” at ARTtech Seminar of Assembly computer festival (video embedded at the end of this post). In the talk I discussed some of my own work, and gave an overview on current consumer VR and its near future. In this post I want to focus on the following three considerations for VR developers that I laid out in the finale of the talk:

1. Justification for VR

Ask yourself, why does your application need to utilize VR? Are you using VR just as a gimmick? Games and other applications do not get magically better just by converting them into VR. The use of VR is a no-brainer in certain types of games and entertainment where additional immersion and depth cues are important. But that is not the case for all games (2D games being the most obvious ones), let alone business software.

Take into account that currently the added immersion of head-mounted displays come at the cost of ergonomics; the user has to wear a heavy, sweaty headset that induces vergence-accommodation conflict and suffers from a low resolution. Over time all these issues will be alleviated and even removed altogether, but people will still be using 2D displays far into the foreseeable future. The added value from the use of VR must outweigh its costs for your application.

Furthermore, VR interfaces and traditional interfaces excel at different tasks (I’ll discuss that in a future post), and it is not clear yet in which application domains the use of VR brings noticeable benefits. Entertainment and training VR applications seem like safe bets. But the net benefits are less clear for other domains. For example, in the domain of 3D content creation we can pose the following question: which of the numerous real-world 3D modeling and animation tasks faced daily by production companies become more efficient in VR? Further experimentation is needed from researchers and practitioners of VR.

2. Social VR

I encourage VR developers to give thought on how they could benefit from having people interact together within their VR application. Mere head and controller tracking adds a good amount of expressive power to non-verbal communication in VR. A glimpse of this can be seen at the end of the Oculus Toybox demo video. Humans are social by nature, and all the major consumer VR companies are looking into bringing more human expressions into VR. Thus, in the future consumer VR tracking systems will track our whole bodies, eyes, and facial expressions.

At one end of the social VR spectrum is the concept of metaverse, along with massive online virtual worlds and social networks. AltspaceVR and JanusVR are examples of early attempts at creating immersive, online virtual worlds. At the moment they are still relatively small scale and could be described as VR playgrounds for multiple users. In contrast to open virtual worlds and VR town squares, there will also be demand for more intimate telepresence applications for two people or small groups to convene. Such applications could be a part of a larger metaverse or made available as a standalone, single-purpose app like Skype.

VR game developers should consider adding social dimensions to their games, even for single-player experiences. Simplest way to do this is to implement spectator modes and live VR streaming. A company called Vreal is developing a software platform for that purpose, with the aim of becoming the Twitch of VR.

Multiplayer games that involve waiting (e.g. for the start of the next match) could include simple VR waiting rooms for social interaction. As online communities tend to be riddled with abuse, you shoul look into ways of reducing such bad behavior.

And lets not forget the possibilities that online collaboration in VR presents for business software, as demonstrated by MiddleVR‘s Improov3 demo:

3. Augmented Virtuality / Multitasking

Many current consumer VR headsets completely block the view to the real world, requiring the user’s full attention. If you’re a VR game developer, ask yourself whether your game is captivating enough to keep players away from other activities. Because when the player gets bored, the only escape is to remove the headset and quit the game.

All games become repetitive sooner or later, when the player gets used to the gameplay mechanic or is forced to do mindless grinding in order to proceed. Nevertheless, many players keep playing because they want to see what the game has to offer around the next corner. In non-VR games the players can cope with the boredom by simultaneously engaging some additional activity.

According to a study by Foehr (2006), American teenagers frequently consumed another media while playing video games; 41% of the total time spent on video games involved such multitasking. Playing video games was most commonly paired with watching TV and listening to music. Due to the reality-occluding nature of head-mounted displays, VR developers need to see extra effort to provide similar multitasking capacities that are implicitly present in non-VR games.

HTC and Valve were smart to allow some real-world multitasking by equipping the Vive headset with a camera. This augmented virtuality implementation allows the user to utilize their keyboard and grab their drink while wearing the headset.

Fortunately VR can be augmented with anything, and we are not limited only to real world elements. Envelop VR (EDIT: they folded, check out a company called V instead) and Virtual Desktop applications already demonstrate how to use 2D applications in VR. But rather than have a VR desktop application, I’m more enthusiastic about bringing arbitrary 2D content and software streams inside any VR application or game. This will allow the user to seamlessly multitask between the 2D streams and the actual VR application where they appear. I created the below concept image using a screenshot from Pool Nation VR to illustrate this idea:

Augmented Virtuality Concept

In this example the player has augmented the game with two additional 2D streams positioned in the virtual world: a Reddit browser tab and an episode of The Office (streaming from a hard-drive or online video service such as Netflix). Both streams could be viewed and interacted with while playing virtual pool.

VR developers could allow user-specified 2D streams into their application: video screens, browser tabs, and 2D applications. This is somewhat analogous to custom radio stations of GTA games, which allowed players to listen to their own music while playing. Of course it doesn’t make sense for every developer to implement their own 2D stream functionality, and a Unity/Unreal plugin with those capabilities will emerge in the near future.

To summarize this section: a VR developer should decide if their application allows “in-app multitasking” or requires full attention from users. The latter approach could be too much to ask as far as games are concerned.

UPDATE1: User ‘BOLL’ from Steam forums told me that the following software for injecting “2D streams” into VR apps are already being used and further developed:
https://github.com/Hotrian/OpenVRDesktopDisplayPortal
https://github.com/scudzey/UVROverlay

Apparently these plugins are mostly used by Elite Dangerous players to watch TV streams during long and tedious space travels.

UPDATE2: Yet another “2D injection software” is by a company called V, who have just released a private beta. Upon googling, I found out that Road To VR covered them already in May.

Videos of My Talk and Interview

Thumbnail of the video was not chosen by me, and the talk is relatively vendor neutral.

I also participated in AssemblyTV Fireside chat interview, where the interviewer asked about future ramifications of VR. This led to discussion that I considered to be thought-provoking:

Posted in Virtual Reality | Tagged , , , , , , , | 1 Comment

Pioneering consumer virtual reality

There are a number of compelling reasons about why now is a good time to start working with virtual reality (VR). Most of these points apply to augmented and mixed reality as well.

Pioneering VR

I start off by introducing my two main assertions regarding the current situation of consumer VR:

1. Anyone can become a VR pioneer. Consumer VR is being invented right now, and VR as a media is being defined. VR research has been conducted for decades and in that regard experienced VR researchers have an advantage over hobbyists. But the spread of consumer VR hardware leads to democratization of this new media; now the masses can also have access to high-performance VR equipment. This situation can be compared to the arrival of home video cameras, which gave rise to influential film makers such as Stephen Spielberg.

2. Individuals and small teams can make a big impact in VR. Many areas of consumer VR are uncharted territory, and in that sense independent developers and big companies are on the same level. Both can make major contributions in the field. You could for example get lucky and create a killer application for VR; think of Minecraft, Kerbal Space Program, and other small projects that came to be very influential. Not all discoveries and innovations need an enormous budget and a large team of engineers. A few years from now it will be more difficult to influence the field of VR as it becomes more established. *

This ongoing pioneering phase of consumer VR offers numerous opportunities for developers and creatives:

  • Finding application domains and niches where the use of VR is advantageous.
  • Building social VR platforms.
  • Producing unprecedented, culturally significant VR content.
  • Developing tools for VR content production and distribution, e.g. the photoshops and wordpresses of VR.
  • Pioneering VR content fundamentals, such as effective VR storytelling techniques.
  • Creating better 3D user interfaces for VR and helping to define related standards.
  • Engineering hardware innovations.

Some of these opportunities will have big monetary rewards, and some have important consequences for the future of human culture and the way we interact with computers.

Further considerations

The hype surrounding VR is currently helping developers, and makes it easier to pitch your ideas. But be aware of the inflated expectations that will inevitably lead to a backlash of some magnitude. Furthermore, a mass adoption of consumer VR devices takes several years. So prepare for the long haul. Unity co-founder David Helgason suggested that new VR companies should have funding for the next 2-4 years.

Most developers in the Western world will target the English speaking market. However, one should not underestimate the Chinese VR market, and the possibilities that it offers. For example, gaming cafes are very popular in China, and they are gradually equipped with VR devices.

And finally, lets not forget that VR is fun and the technology provides countless ways to express yourself, both artistically and experimentally. If you want to get involved with VR development, but don’t know where to start, these answers on Quora will point you in the right direction.


* Assertion 2. relates to user-led innovation, which is a concept where not only big producer companies are a source of product innovation, but also individual users (including small companies) and communities. In my PhD thesis I discuss VR also from a user-led innovation perspective (Section 2.3), while the main focus of the thesis is in VR application development. One example of current user-led innovation in the field of VR is the abundant experimentation with different forms of VR locomotion:

Posted in Virtual Reality | Tagged , , , , | 3 Comments

Thoughts on Microsoft Hololens

In May I had the opportunity to try out Microsoft Hololens. It had a phenomenal inside-out positional tracking, which felt very robust. As reported widely online, its field of view is very limited. That is the single biggest obstacle for usability and immersion. As a self-contained wearable display device, Hololens is a great “development kit” for augmented reality developers to start experimenting with the technology. I believe that it will be useful in a number of real-world cases, despite the narrow field of view.

I was surprised that the interactive cursor was locked to the center of the display, and could only be moved only by rotating my head. I was expecting to be able to relocate the cursor by moving my hand in front of the device, because hand gestures are also used for “clicking” and bringing up the menu. Hololens also comes with a wireless clicker peripheral that can be used instead of the gestures. That would be my preferred way for interaction due to the clicker being more robust and ergonomic. Perhaps the “locked” cursor is a good idea after all, for those same reasons.

Trying out Hololens

Coming RUIS for Unity Update

A few words about the future update of RUIS for Unity: The currently distributed version 1.082 still requires Oculus Runtime 1.06, which is obsolete and does not support Oculus Rift CV1. I have created a beta version of RUIS that supports HTC Vive, which I used for adding Vive support for the Vertigo experience. I have not made that version public, because it is still very much a hack. I’m waiting for Unity to release stable version of Unity 5.4, which eases my job by adding native support to Vive and unifies the head-mounted display interface.

I have submitted my PhD thesis (about virtual reality) for review, but I still have a bunch of other projects I’m working on. Therefore the new RUIS version will probably come out in July or August. It’s worth the wait 🙂

Posted in Augmented Reality | Tagged , , , , , , | Leave a comment

Immersive Journalism

I was going through my old photos and found something that I should have blogged years ago.

You see, I met the ”Godmother of Virtual Reality” Nonny de la Peña at IEEE VR2013 conference, and we talked about her work. At that point I had already heard about her Guantanamo Bay detainee VR experience, where the user has to endure in a stress position while hearing “interrogation noises” from the next room.

What a way to put yourself in another person’s shoes! And that is the idea of immersive journalism, a concept coined by de la Peña. You could watch the news from a small box in your room, or you could experience the news in first person with the aid of virtual reality.

I liked Nonny’s ideas and asked to see more of her work. She was very hospitable and in March 2013 she gave me and my friend a tour at the USC Institute for Creative Technologies (ICT) in Los Angeles.

Hunger in LAFirst Nonny showed us her production Hunger in LA. It’s an immersive journalism piece where the driving force is real audio recorded at Los Angeles food bank. At the time of the recording there were delays in food distribution, it started to get crowded, one person had a seizure, and ambulance had to be called.

Novice experiencing Hunger in LANonny described that some viewers of Hunger in LA had been so touched by the experience that they cried. This didn’t happen with me, or my friend who was a VR novice. Perhaps we were all too jaded for that. But the use of real, non-acted audio was very moving, and I can see how people could have strong reactions for such authentic content.

Trying out Hunger in LAThere were all sorts of set pieces in the ICT laboratory as seen in the background of the above photo. Apparently they have been working closely with US army, exploring military training applications of virtual reality.

ICT labWe got to see different parts of the laboratory. Above is a lab desk full of prototypes at USC ICT, where Palmer Luckey worked as a lab technician with FOV2GO head-mounted display.

DK1 in March 2013Oculus had given DK1s to ICT before the official shipping date of March 29th 2013.

Mobile VR prototypeThis was one of the mobile head-mounted display prototypes that we tried.

Lightstage at ICTWe also got a chance to see ICT’s Light Stage, which has been used to capture 3D scans of actors for several movies. Many thanks to Nonny de la Peña for giving us the tour and sharing her work!

Posted in Virtual Reality | Tagged , , , , , | Leave a comment

HTC Vive setup experiences

In November I got to borrow a HTC Vive dev kit for a few days. I was responsible for setting it up at a AEC hackathon in Helsinki. Before I share my experiences in detail, here are my two suggestions to Valve:

  • Allow developers to opt out from auto-updating SteamVR software. If I have a working demo configuration, I don’t want an automatic update to break it with a new plugin version etc.
  • Do not require Steam to run in the background of SteamVR. This is just common cleanliness, as it was a bit annoying that every time I started SteamVR it also launched Steam.

Overall the experience, particularly running the demos, was great. I already had tried the Aperture Robot Repair demo in August, but the display quality and tracking accuracy still made me very happy. I got very positive reactions from my colleagues in Aalto University to whom I showed the Vive for the first time.

Aalto University researchers trying out HTC Vive for the first time

Getting the dev kit to work took awhile. After connecting and placing the physical hardware, SteamVR wasn’t able to properly access the hardware no matter what I tried. And there were plenty of things to try, as can be seen in the SteamVR forum. It wasn’t until I updated the firmware for the HMD and the controllers that everything started working. I had to use rather unwieldy command line tools, whereas Oculus Rift DK2 had offered a simple firmware update process through the Oculus Configuration Utility.

When all the systems showed green status in SteamVR, creating and running a test VR scene in Unity Editor was a breeze. As a side note I’m happy to see that Unity is integrating VR functionality directly into their engine, which eases development for different VR platforms. I’d imagine that Epic is doing the same with Unreal Engine.

Occasionally the Vive stopped working after restarting my computer, and I needed to uninstall Vive’s USB drivers and reboot to solve the problem. According to Valve this issue is related to Vive’s HMD control box. From what I understand the vast majority of problems reported in SteamVR forum can be attributed to that. I believe that the situation will be much better with the 2nd Vive dev kit.

I didn’t have any problems with the tracking quality and everything ran smoothly. My only grievance is that I couldn’t install any of the cool Vive demos from Steam. Currently Valve has to separately set those privileges for each Steam account, and we couldn’t get them to do that in the short time-frame that we had. Instead I resorted to googling for unofficial, 3rd party Vive demos, which understandably had lower production values. For some reason I needed to run each demo in administrator mode to get them to work.

To summarize: this first HTC Vive dev kit, its hardware and parts of the software, feels like it was hacked together by a group of scientists in a lab. What actually happened is perhaps very close to that. In contrast Oculus DK1 and DK2 were slightly more polished, because as a pioneer Oculus had more to prove. This is not a complaint, and I’m quite happy that HTC and Valve decided to grant developers such an early access. HTC Vive, particularly its Lighthouse tracking, is just so good that it’s easy to overlook the lack of refinement in this early dev kit. I hope that soon I will get a permanent access to HTC Vive, so I can integrate it into my RUIS toolkit, enabling developers to combine room-scale Lighthouse tracking with full-body tracking of Kinect.

Posted in Virtual Reality | Tagged , , , , , , , , | Leave a comment

RUIS receives praising review

An article by researchers from The University of Louisiana at Lafayette reviews RUIS among with two other virtual reality toolkits for Unity. RUIS did very well in the review, and the original version of the article that I read in August stated that

with RUIS being free and highly versatile, it is the clear winner for low budget applications.

The author changed the wording in the final article version to “promising for low budget applications“, because their adviser suggested using a wording that sounds less biased. Oh well 🙂

In the article RUIS reached almost the same score as MiddleVR (a professional $3000 toolkit) which came on top when price was not considered, as seen from the below table adapted from the article:

getReal3D MiddleVR RUIS
Performance & reliability 2 5 4
CAVE display flexibility 2 4 3
Interaction flexibility 2 4 5
Ease of use 4 3 3
VR applications 2 5 4
total  12 21 19

In the above table each category was given 1-5 points.

In terms of “Documentation and support” getReal3D scored 10, MiddleVR 20, and RUIS 14. Improving RUIS documentation and providing tutorials is in our todo list.

The article is slightly mistaken in that it says that top and bottom CAVE displays are not supported by RUIS, but this is not the case. The display wall center position, normal, and up vectors just need to be configured in RUISDisplay component. Please note that RUIS is mostly intended for CAVEs with a small number of displays because each view is rendered sequentially. For faster CAVE rendering in Unity you should probably try MiddleVR or getReal3D, which offer clustered rendering.

The article was published in International Journal for Innovation Education and Research (IJIR).

P.S. I participated in Burning Man 2015, where I demoed our Vertigo application at VR Camp. They had a dozen of computers with Oculus Rift DK2 and a HTC Vive. Here is a photo of me trying out Tilt Brush on HTC Vive.

2850TiltBrush

Posted in RUIS | Tagged , , , , , , | Leave a comment